A6, Mimosa 5.15-6.425GHz Access Point with Integrated 24 dBi Beamforming Antenna, 802.11ax Wi-Fi 6E, 8×8 MU-MIMO OFDMA, GPS Synchronization
Supercharged Wi-Fi 6E-Based Access
The A6 sets a new standard in efficiency, performance, capacity, and interference handling for unlicensed PTMP deployments. New features such as OFDMA, 1024-QAM, 8-stream beamforming, and support for up to 160 MHz of bandwidth, deliver huge leaps in reliability and performance for the unlicensed band.
Manufacturer: Mimosa
Description
Speed and Capacity for Dense Markets and Crowded Towers
Compete with fiber speed offerings in both urban and rural tower sites with the A6. Wi-Fi 6E technologies offer unparalleled 60 bps/Hz spectral efficiency and high capacity 8×8 multi-user MIMO and OFDMA technologies, ensuring sufficient AP capacity to handle large populations (200+ subscribers) at almost any rural tower location, or even in the most dense city urban environments.
Reliable in Noisy Environments
Unlicensed bands usually have crowded spectrum in cities, and even at tower collocation sites in rural areas. The A6 brings an arsenal of new, advanced noise fighting techniques to make it easier than ever to overcome noisy conditions and deliver reliable services in unlicensed spectrum.
Improved Link Budget in a Small Form Factor
Whether it’s overcoming noise or punching through a bit more near-LOS foliage, who wouldn’t want an improved link-budget? The A6 introduces a series of new integrated antenna and baseband features to get over 10 dB signal improvement without needing to increase the device form-factor size.
Easy to Deploy
Small sites require complex and costly power and switching equipment between backhauls and APs. As new devices introduce higher speed 10 Gbps equipment, these costs are rapidly making site expansion too expensive for ISPs. The A6 is equipped with an internal switch and multiple integrated 10 Gbps SFP+ for easy interconnectivity without requiring an external switch. Dedicated 48 V DC power inputs remove the need for additional Ethernet runs when deploying fiber.
Data Sheets
Mimosa A6 Specifications
Specifications
Performance
• Max Throughput:
7 Gbps IP aggregate UL/DL (9608 Mbps PHY)
• Wireless Protocols:
WiFi Interop; TDMA (future release)
Radio
• MIMO & Modulation:
8×8 MU-MIMO;
OFDMA, BPSK-1024QAM
• Bandwidth:
Single or dual 20/40/80/160 MHz channels
• Frequency Range:
5150–6425 MHz
Restricted by country of operation
• Max Output Power: 29 dBm
• Rx Sensitivity: @ 1024 QAM
-47 dBm @ 160 MHz
-50 dBm @ 80 MHz
-53 dBm @ 40 MHz
-56 dBm @ 20 MHz
Physical
• Dimensions:
Height: 490 mm (19”)
Width: 295 mm (11.6”)
Depth: 75 mm (3”)
• Weight: 3.95 kg (8.7 lbs)
• Enclosure Characteristics:
Outdoor UV-stabilized, engineered polymer with
integrated metal mounting back
• Wind Survivability: 200 km/h (125 mph)
• Wind Loading: 39 kg @ 160 km/h (86 lbs @ 100 mph)
• Mounting: Dual standard pole straps for
30 mm (1.18”) to 90 mm (3.54”) OD pipes
• Network Interface2: (1) GbE copper PoE,
(2) 10 GbE SFP+ (optical)
Antenna
• Gain: 24 dBi with adaptive beamforming
• Beamwidth: 90º azimuth, 7º elevation
• Front-to-Back Ratio: >30 dB
• Cross-Polar Isolation: >20 dB
• Polarization: Dual-linear XPIC
Power
• Max Power Consumption: 40 W
• System Power Method: Outdoor PoE or DC
• System Lightning & ESD Protection: 6 kV
• PoE Power Supply:
Passive PoE compliant, 48–56 V (not included)
Environmental
• Outdoor Ingress Protection Rating: IP67
• Operating Temperature: -40°C to +55°C (-40°F to 131°F)
• Operating Humidity: 5 to 100% condensing
• Operating Altitude: 4,420 m (14,500’) maximum
• Shock and Vibration: ETS 300-019-2-4 class 4M5
Features
• 10 Gigabit Ethernet: (2) SFP+ (optical) ports
• Management Services:
MMP support; Netconf (future support); SNMPv2c/v3; Syslog;
HTTPS; HTML 5 based Web GUI; IPv4 and IPv6
• Smart Spectrum Management:
Active scan monitors/logs ongoing RF interference across all
channels (no service impact); Dynamic auto-optimization of
channel and bandwidth use
• Security: WPA3; AES; RADIUS; 802.1x authorization
• QoS: Supports 4 user-configurable QoS levels for SRS (GPS
Sync) (CBWFQ); Behavior Aggregate (BA) and CoS Classifier,
with user-configurable precedence
• VLAN: Per subscriber VLAN, Q-in-Q, triple tagging;
Management VLAN
• Collocation Synchronization:
1PPS GPS TX/RX synchronization for collocated co-channel
radios; Adjustable up/downstream bandwidth ratio
• GPS Location:
GNSS-1 (GPS + GLONASS)
Regulatory and Compliance
• Approvals:
FCC Part 15.407; IC RSS210;
CE (RED, EMCD, LVD, RoHS);
ETSI 301 893/302 502
• RoHS Compliance: Yes
• Safety: EN 62638-1
