Description

Cambium Networks introduces the PTP 850E E-band Radio, an ultrahigh capacity, all-outdoor Ethernet backhaul operating in the E-band (70.80 GHz). PTP 850E supports 250, 500, 1000, and 2000 MHz channels with BPSK to 512 QAM and delivers up to 10 Gbps capacity in 1+0 configuration. PTP 850E can also be used in multiband configuration with PTP 820C, PTP 820S, or third-party microwave radios to provide robust links of up to 10 Gbps. This is the high band version of the product.

Product Features
• Support QSFP (40GE) interface
• Multiple SFP+ (10GE) interface
• Layer 1 link aggregation
• Multi-band support with PTP 820 or third-party microwave link

Radio Features
• BPSK to 512 QAM with hitless ACM
• Adaptive Coding Modulation and Bandwidth (ACMB)
• XPIC
• Built-in frequency scanner to determine the current interference level of each channel
• Multiband with PTP 820C, PTP 820C HP, PTP 820S, or third party microwave radio
• ATPC
• Adaptive Bandwidth Notification (EOAM)

Ethernet
• Ethernet Interfaces
• Port 1: DC port
• Port 2: RJ45, 1 GE/Management/PoE
• Port 3: SFP cage, 1/ 2.5 GE Multiband Port
• Port 4:
– QSFP- 4 x 1/10 GE or 1 x 40 GE traffic interface (QSFP+)
– Option for SFP+ (1x10GE) with adaptor
• Port 5: SFP, 10 GE (SFP+) Note: SFP+ and QSFP+ devices must be of industrial grade (-40°C to +85°C)
• Ethernet Features
• MTU-9612 Bytes
• Quality of Service
– Multiple Classification Criteria (VLAN ID, p-bits, IPv4 DSCP, IPv6 TC, MPLS EXP)
– 8 CoS queues per port
– Deep buffering (configurable up to 64 Mbit per queue)
– WRED
– P-bit marking/ remarking
• 4K VLANs
• VLAN add/ remove/ translate
• Y.1731 Ethernet OAM
• Y.1731 Ethernet Bandwidth Notification (ETH-BN)

Product Specifications
Radio
• 71-76 GHz, 81-86 GHz
• 1+0, 2+0 (XPIC)
• Multiband with PTP 820C, PTP 820C HP

Management
• SNMP
• REST
• SDN Support:
• NETCONF/ YANG

Synchronization
• Enhanced Ethernet Equipment Clock (eEEC) Specification (G.8262.1)
• PTP Telecom Boundary Clock (T-BC) andTime Slave Clock (T-TSC) Specification (G.8273.2)
• PTP Telecom Transparent Clock (T-TC) Specification (G.8273.3)
• Enhanced SyncE Network Limits (G.8261, clause 9.2.1)
• Enhanced PTP Network Limits (G.8271.1)
• Ethernet Synchronization Messaging Channel (ESMC)(G.8264, clause 11)
• PTP Telecom Profile for Time (Full Timing Support) (G.8275.1)
• Precision Time Protocol (version 2, IEEE1588-2008)

Standard
• Metro Ethernet Forum (MEF)
• Carrier Ethernet 2.0
• Supported Ethernet Standards
• 10/100/1000base-T/X (IEEE 802.3)
• Optical 10Gbase-X (IEEE 802.3ae)
• Ethernet VLANs (IEEE 802.3ac)
• Virtual LAN (VLAN, IEEE 802.1Q)
• Class of service (IEEE 802.1p)
• Provider bridges (Q-in-Q – IEEE 802.1ad)
• Link aggregation (IEEE 802.3ad)
• Auto MDI/MDIX for 1000baseT
• RFC 1349: IPv4 TOS
• RFC 2474: IPv4 DSCP
• RFC 2460: IPv6 Traffic Classes
Security
• Secured protocols (HTTPS, SNMPV3, SSH, SFTP)
• RADIUS authentication and authorization
• TACACS+ authentication and authorization (session-based)
• AES Encryption- AES 256
Standards Compliance
• Radio Spectral Efficiency: EN 302 217-2
• FCC 47 CFR, part 15, subpart B, class A, IEC 61000-4-29
• Surge: EN61000-4-5, Class 4 (for PWR and ETH1/ PoE Ports)
• Safety: EN 60950-1, EN 62368-1, IEC 60950-1, IEC 62368-1, UL60950-1, UL 62368-1, CAN/CSA C22.2 NO 60950-1, CAN/CSA C22.2 NO 62368-1, EN60950-22, IEC 60950-22, UL 60950-22, CAN/CSA C22.2 NO 60950-22
• Storage: ETSI EN 300 019-1-1 Class 1.2
• Transportation: ETSI EN 300 019-1-2 Class 2
• Ingress Protection: IP67

Technical Specifications
• Environmental Specifications: -33°C to +55°C (-45°C to +60°C extended); -27°F to +131°F (-49°F to +140°F extended)
• Power Input Specifications:
• Standard Input: -48VDC
• DC Input Range: -40.5 to -60 VDC
• Power Redundancy option by using both a DC power input and a passive PoE injector simultaneously
• Power Consumption Specifications:
• Active: 58
• Standby: 47W